ANSI B16.5 - Flanges Bututu da Flanged Fittings Bakin Karfe Carbon Karfe

ANSI B16.5 misali ne na kasa da kasa da Cibiyar Matsayi ta Amurka (ANSI) ta bayar, wanda ke tsara girma, kayan aiki, hanyoyin haɗi da buƙatun aikin bututu, bawuloli, flanges da kayan aiki.Wannan ma'auni yana ƙayyadad da daidaitattun ma'auni na flanges bututun ƙarfe da taruka na haɗin gwiwa, wanda ya dace da tsarin bututu don amfanin masana'antu gabaɗaya.

Babban abubuwan da ke cikin ma'aunin ANSI B16.5 na duniya:

Rarraba Flange:

Flange wuyan walda, Zamewa akan flange mai lamba, Zamewa akan flange farantin, Flange makafi, Flange waldi na soket, Flange mai zare, Flange haɗin gwiwa

Girman Flange da ajin matsa lamba:

ANSI B16.5 yana ƙayyade ginshiƙan ƙarfe na jeri daban-daban da nau'ikan matsa lamba, gami da
Diamita mara kyau NPS1/2 inch-NPS24 inch, wato DN15-DN600;
Flange class 150, 300, 600, 900, 1500 da 2500 azuzuwan.

Nau'in saman Flange:

Ma'auni ya ƙunshi nau'ikan saman daban-daban kamar su flange, flange flange, flange concave, flange harshe, da tsagi flange.

Kayan flange:

ANSI B16.5 ya lissafa kayan flange da suka dace da yanayin aiki daban-daban, kamar carbon karfe, bakin karfe, gami karfe, da sauransu.

Misali: Aluminum 6061, Aluminum 6063, Aluminum 5083;
Bakin karfe 304 304L 316 316L 321 316Ti 904L;
Carbon karfe sa ga flanges: Q235/S235JR/ST37-2/SS400/A105/P245GH/P265GH/A350LF2.

Haɗin flange:

Ma'auni yana kwatanta hanyar haɗin flange daki-daki, gami da adadin ramukan ƙullun, diamita na ramukan kusoshi, da ƙayyadaddun bayanai.

Rufe Flange:

Daidaita siffar siginar shinge na flange da zaɓin mai ɗaukar hoto don tabbatar da aminci da aikin hatimi na haɗin gwiwa.

Gwajin Flange da dubawa:

Ma'auni ya ƙunshi buƙatun gwaji da dubawa don flanges, gami da duban gani, dubawar girma, karɓar kayan aiki, da gwajin matsa lamba.

Alamar flange da marufi:

Yana ƙayyade hanyar yin alama da buƙatun marufi na flanges, ta yadda za a iya gano flanges daidai da kiyaye su yayin sufuri da amfani.

Aikace-aikace:

Matsayin ANSI B16.5 yana da aikace-aikace masu yawa kuma ya dace da tsarin bututun mai a masana'antu kamar man fetur, iskar gas, masana'antar sinadarai, wutar lantarki, yin takarda, ginin jirgi, da gine-gine.